Worked perfect on my 1980 CB750. The fitment was perfect. The adjustable lever is a brake addition to dial in the brake master cylinder to your liking. It is very responsive to your input
상세 보기 유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
109,533.15 KRW (11,800 JPY)
배송 정보
먼저 상품 양식을 선택하세요.
CB400SF
97-98 ver.S
CB400SF
08-21 Revo
CB400SF
99-07 SPEC-III
CB400SF
99-07 SPEC-I
XJR1300
98-99
XJR400R
93-00
XJR400
93-00 S
XJR400
93-00
GSX-R750
96-00
GSX-R750
94-95 SPR
GSX-R750
85-87 R
GSX-R750
85-87
ZX-6R
98-00
ZX-6R
95-97
ZEPHYRX
97-08
ZRX1200R
01-08
SPEED TRIPLE
98 T509
SPEED TRIPLE
99-
SPEED TRIPLE
96
DAYTONA955i
99-
Piston diameter: 5/8 inch (approx. 15.9mm)
Compatible handlebar diameter: Φ22.2
Lever adjust (6-stage adjustable)
Reservoir tank hose length: 70mm
[Included Parts]
・Brake switch (flat terminal 2-pole type)
・Aluminum tank stay x 1
・Mirror holder (M10 x P1.25 right-hand thread) x 1
** Banjo bolt (M10 x P1.25) sold separately.
* Brake hose routing and angle differ from stock.
* Always replace gaskets with new ones. 3 gaskets required for double banjo, 2 for single banjo.
* Depending on the caliper combination, some lever adjuster positions may cause the lever to contact the grip before sufficient brake fluid pressure is generated.
* Adjust the lever adjuster and use a position where the brake is effective and the lever does not contact the grip.
* If adjustment is not possible, use the separately sold 4-stage adjustable lever (Buff Clear 23319 or Black 27354).
* Do not use silicone-based DOT5 (BF5) brake fluid.
* Using an RC30-type lever will keep the cylinder depressed, causing vapor lock; do not use any lever other than the specified one..
Here is the instruction manual.
Click here for the instruction manual
Click here for the instruction manual
Click here for the instruction manual
Click here for the instruction manual
[Repair parts]
Standard lever assembly (without adjuster: Buff clear) (23648)
Standard lever assembly (without adjuster: Black) (77704)
・Standard lever assembly (with adjuster / 4-step adjustment.): Buff clear) (23319)
・Standard lever assembly (with adjuster / 4-step adjustment.): Black) (27354)
・Standard lever assembly (with adjuster / 6-step adjustment.): Buff clear) (62286)
・Standard lever assembly (with adjuster / 6-step adjustment.): Black) (62283)
Mirror holder (M10XP1.25: Iron Nail Silver) (23255)
Mirror holder (M10XP1.25: Gold) (28514)
Mirror holder (M10XP1.25: Black) (36206)
・Tank bracket (Silver) (24341)
・Tank bracket (black) (30895)
・Pivot Bolt & Nut (Black) (23256)
・Bolt & Nut (Silver) (36211)
・Reservoir tank and hose (standard) (77869)
・Reservoir tank and hose (thin type) (23650)
・Tank hose (for horizontal brake) (77864)
・Master Cylinder Repair Kit (5/8" only) (23259)
・Master Cylinder Repair Kit (14mm only) (24443)
・Master Cylinder Repair Kit (1 /2" only *Standard / short common) (23655)
・Master Cylinder Repair Kit (11mm Only *Standard / Short) (23653)
・Brake switch assembly (23257)
・Connector set (42428)
.
Bolt-on design includes tank stay and brake switch.
Wide lineup available to match stock master cylinder piston diameters and colors.
● For Φ22.2 handlebars.
● Standard lever type and short lever type (approx. 35mm shorter than standard) available.
● Standard lever type features 6-stage lever adjustment.
● Includes brake switch (flat terminal 2-pole type), aluminum tank stay x 1, and mirror holder (M10 x P1.25 right-hand thread) x 1.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.