유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
110,173.64 KRW (11,869 JPY)
배송 정보
먼저 상품 양식을 선택하세요.
CBR600F
92-98
CB750
92-08
PCX125
11-12 [Where used] Right side
XR100MOTARD
05-07
CYGNUS X
Cab for domestic use 5UA [part used] Right side
TZM50
94-99 R
TZR50
93-99 R
TZR50
90-92
GSX400
94- S
GSX400
94-98
BANDIT250
92-99 V
BANDIT250
92-99 VZ
NINJA250R
13-14
NINJA2 Helmet50RR
08-12
Z250 (2013-)
13-14
BALIUS2
Piston diameter: 1/2 inch (approx. 12.7mm)
Compatible handlebar diameter: Φ22.2
Lever adjust (6-position adjustable)
Reservoir tank hose length: 70mm
[Included Accessories]
Brake switch (flat terminal 2-pole type)
Aluminum tank stay x 1
Mirror holder (M10 x P1.25 right-hand thread) x 1
** Banjo bolt (M10 x P1.25) sold separately.
* Brake hose routing and angle differ from stock.
* Always replace gaskets with new ones. 3 gaskets required for double banjo, 2 for single banjo.
* Depending on the caliper combination, the lever may contact the grip before sufficient brake fluid pressure is generated. Do not use in such positions.
* Adjust the lever adjuster so that the brake is fully effective and the lever does not contact the grip.
* If adjustment is not possible, use the separately sold 4-position adjustable lever (Buff Clear 23319) or (Black 27354).
* Do not use silicone-based DOT5 (BF5) brake fluid.
* Using an RC30-type lever will keep the cylinder depressed, causing vapor lock. Never use levers other than those specified.
* Specifications are subject to change without notice due to manufacturer convenience..
Here is the instruction manual.
Click here for the instruction manual
Click here for the instruction manual
[Repair parts]
Standard lever assembly (without adjuster: Buff clear) (23648)
Standard lever assembly (without adjuster: Black) (77704)
・Standard lever assembly (with adjuster / 4-step adjustment.): Buff clear) (23319)
・Standard lever assembly (with adjuster / 4-step adjustment.): Black) (27354)
・Standard lever assembly (with adjuster / 6-step adjustment.): Buff clear) (62286)
・Standard lever assembly (with adjuster / 6-step adjustment.): Black) (62283)
Mirror holder (M10XP1.25: Iron Nail Silver) (23255)
Mirror holder (M10XP1.25: Gold) (28514)
Mirror holder (M10XP1.25: Black) (36206)
・Tank bracket (Silver) (24341)
・Tank bracket (black) (30895)
・Pivot Bolt & Nut (Black) (23256)
・Bolt & Nut (Silver) (36211)
・Reservoir tank and hose (standard) (77869)
・Reservoir tank and hose (thin type) (23650)
・Tank hose (for horizontal brake) (77864)
・Master Cylinder Repair Kit (5/8" only) (23259)
・Master Cylinder Repair Kit (14mm only) (24443)
・Master Cylinder Repair Kit (1 /2" only *Standard / short common) (23655)
・Master Cylinder Repair Kit (11mm Only *Standard / Short) (23653)
・Brake switch assembly (23257)
・Connector set (42428)
.
Bolt-on design includes tank stay and brake switch.
Wide lineup available to match the piston diameter and color of stock master cylinders.
● For Φ22.2 handlebars.
● Standard lever type and short lever type (approx. 35mm shorter than standard) available.
● Standard lever type features 6-position lever adjustment.
● Includes brake switch (flat terminal 2-pole type), aluminum tank stay x 1, and mirror holder (M10 x P1.25 right-hand thread) x 1.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
이미지 포함 리뷰
호환성:HONDA 400X 400X 13, HONDA CB250RS CB250RS 80-82, HONDA CB500X CB500X, HONDA CB750 CB750 92-08, HONDA CBR1000F CBR1000F 89-92
Apr 6, 2020
Installed on GB250
Installation is not very difficult and takes about 30 minutes
Lever is Quantity:Pair (for Left and Right) The OEM was ported because it was changed in
I shaved a little bit with Grinder in two places and Exactly completed successfully
We are very satisfied with it
호환성:HONDA 400X 400X 13, HONDA CB250RS CB250RS 80-82, HONDA CB500X CB500X, HONDA CB750 CB750 92-08, HONDA CBR1000F CBR1000F 89-92
Feb 7, 2020
Nissin brake master cylinder arrived in Australia in excellent condition and works beautifully on my VFR750.It Is very well made and looks great on my bike. Lever adjustment is very easy and effective.I am very happy with this product.
상세 보기호환성:HONDA 400X 400X 13, HONDA CB250RS CB250RS 80-82, HONDA CB500X CB500X, HONDA CB750 CB750 92-08, HONDA CBR1000F CBR1000F 89-92
Jan 7, 2020
The OEM Brake master fee ring doesn't feel right (Did the air bite some?) I also thought about Radial, but it's not a good idea I was worried that it would do something bad to the ABS & there is no clearance to the Cowl side, so I didn't use it After the replacement, the feeling of operation is better and there is no rattle, and the Lever distance adjustment is also available It was
상세 보기호환성:HONDA 400X 400X 13, HONDA CB250RS CB250RS 80-82, HONDA CB500X CB500X, HONDA CB750 CB750 92-08, HONDA CBR1000F CBR1000F 89-92
Jun 17, 2019
This is an in-play for the CBR400RR/NC29
Nisshin's SemiRadial master at the time of delivery, probably due to age-related deterioration It's a matter of taste, but I've replaced the cylinder with the Snap and Fee Ring that works I couldn't get used to it, but I couldn't get used to it, though I tried to get used to it every time I rode The diameter of Master Cylinder is 12.7mm in the service manual of NC29 In other words, since the word "1/2-inches" is used in the Master Cylinder of OEM equivalent So we put it back
I didn't know if OEM parts would be available, and I didn't want to use the used parts for braking purposes, so I'm going to be graceful I went with a new one, but for now, I'm satisfied with the scope of the BrakeTouch! The movement of the Caliper piston has been checked, but the touch is a little spongey and perhaps this is a sign that OEMHose has deteriorated, and Master It seems that it is not yet perfect to show the true value of Cylinder Nevertheless, this Master Cylinder also has the adjustment mechanism of Lever, so it can be used for If you set the Lever to a distant position, the pull is of the Large texture It was a good thing that I was able to set up in Controllable Brake and replaced it with I am satisfied
This Master Cylinder is a Universal Product and has a Handle It is different from OEM Master Cylinder of NC29 because it can be used for mirror cars The handling of the tank is slightly different, and the included Tank Bracket allows you to fix it at an angle So I'm thinking of rebuilding Bracket eventually After all, I can't settle down unless it fits well I envy the dedicated parts of this, but it is Universal parts which can be obtained with new ones It can't be helped
호환성:HONDA 400X 400X 13, HONDA CB250RS CB250RS 80-82, HONDA CB500X CB500X, HONDA CB750 CB750 92-08, HONDA CBR1000F CBR1000F 89-92
May 3, 2019
I put a 14mm Mesh hose in my SRX400 I don't know if it's because Lever is so far away and AxelControl is hard to do, and it's not very subtle I can't control it, so I'm going to put this 1/2-inches on it I saw it I'm happy with the way it turned out, personally
However, the dimensions of the Tank and Tank fixed Bracket do not feel right Quantity to which a little more hose length and shape can be added without modification:I want it to be a set
리뷰 상세
