유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
- 재고 있음
9,987.94 KRW (1,076 JPY)
Webike 포인트: +11 pt
(102.1 KRW)
배송 정보
-
먼저 상품 양식을 선택하세요.
장착 정보
HONDA
적합 모델 정보 테이블 열기
-
MONKEY
Z50J/AB27
-
glom
JC61/JC75/JC92
-
MONKEY125
JB02/JB03
-
GORILLA
Z50J/AB27
모두 보기
HONDA
아래 상품 설명은 Google에서 자동으로 번역되었습니다.
상품 상세
-
스프로킷 사용 Front
-
적용 가능한 체인 크기 420
-
스프로킷 재질 steel
-
앞 스프로킷 톱니 수 15
[Size] 420
**The 17T will interfere with the crankcase on Monkey and Cub type engines (50cc-90cc).
*The number of rear sprockets ÷ the number of front sprockets = reduction ratio The higher the value of this reduction ratio, the more acceleration is emphasized, and the lower the value, the more maximum speed is emphasized.
*Wide chain guide plate (683-14324) is separately required for 16 / 17T.
*Depending on the model of vehicle, the number of T's that cannot be installed or the guide plate may need to be replaced or a speed conversion pulse unit may need to be installed.Please refer to the compatibility chart for details.
*When installing 12/13T, a separate M6 x 10 cap bolt is required.
*There may be changes in product specifications due to the manufacturer's reasons..
* 이미지는 참고용입니다. 표시된 이미지는 실제 제품과 다를 수 있습니다.
For repairing the stock or setting the secondary reduction ratio.
Sprockets are consumables.It is recommended to check every 1000km as a general public road riding guide.
If the tip of the tooth has become thin, replace it.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
고객 리뷰
이미지 포함 리뷰
- 전체
- Japan (62)
- South Korea (6)
- Australia (5)
- Russia (4)
- Hong Kong (2)
- Vietnam (2)
- (1)
- Belgium (1)
- Finland (1)
- Germany (1)
- Israel (1)
- Thailand (1)
- United States (1)
호환성:HONDA APE 100 HC07, HONDA APE 100-TypeD HC13, HONDA APE 50 AC16, HONDA APE 50-TypeD AC18, HONDA CROSS CUB50 AA06
May 12, 2023
도움이 되었나요?
호환성:HONDA APE 100 HC07, HONDA APE 100-TypeD HC13, HONDA APE 50 AC16, HONDA APE 50-TypeD AC18, HONDA CROSS CUB50 AA06
장착 기종: HONDA Monkey 125
Mar 22, 2023
The enclosed fixing pin is weak, so it is better to use a genuine pin. It is lighter than genuine sprocket, so it looks good and looks good.
상세 보기도움이 되었나요?
호환성:HONDA APE 100 HC07, HONDA APE 100-TypeD HC13, HONDA APE 50 AC16, HONDA APE 50-TypeD AC18, HONDA CROSS CUB50 AA06
장착 기종: HONDA MSX125 (GROM)
Feb 13, 2023
Larger Front Sprocket was needed for the 181cc BBK on the Grom
About quality and texture: I am happy with the quality of the front sprocket from Kitaco. The 16 tooth 420 pitch front sprocket is manufactured from high carbon steel with lightning holes.About the feeling of use: The main reason I removed the OEM Honda front sprocket was to increase the size of the front sprocket to help lower the RPM of the 181cc BBK when crusing at high speed and as a bonus of the lighter weight helps with performance.Products to buy together: A larger sprocket guard plate would also be desirable to purchase alongside the front sprocket for additional clearance when using a larger front sprocket.Difficulty of installation: The process to install takes about 15 minutes. Remove the sprocket cover and back off the chain tension. Remove the two bolts that hold the locking plate and then remove the sprocket. Install the new sprocket, secure the locking plate and make a chain adjustment. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a front sprocket made from a durable material and designed with the best performance in mind at a great price as compared to the basic styled front sprockets from the other bands and non as cheap in the 16 tooth size.About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you wish to swap front sprockets for a change in tooth size then inspect your current driven sprocket and drive chain to see if they will be suitable to use with your new front sprocket and if not then purchase all three parts together.
상세 보기도움이 되었나요?
호환성:HONDA APE 100 HC07, HONDA APE 100-TypeD HC13, HONDA APE 50 AC16, HONDA APE 50-TypeD AC18, HONDA CROSS CUB50 AA06
Dec 24, 2022
Приобретал для HONDA SUPER CUB 50 CUSTOM.Артикул детали: 530-1010215, производитель KITACO.Заказал данную деталь на 15 зубов – решил поменять значение соотношения передаточного числа передач, передачи стали длиннее, мопед стал более продуктивный и плавный. Всё подошло, качество KITACO отличное. Спасибо webike.Purchased for HONDA SUPER CUB 50 CUSTOM.Part Number: 530-1010215, manufacturer KITACO.I ordered this part for 15 teeth – I decided to change the value of the ratio of the gear ratio, the gears became longer, the moped became more productive and smooth. Everything came up, the quality of KITACO is excellent. Thanks to webike.
상세 보기도움이 되었나요?
호환성:HONDA APE 100 HC07, HONDA APE 100-TypeD HC13, HONDA APE 50 AC16, HONDA APE 50-TypeD AC18, HONDA CROSS CUB50 AA06
Dec 24, 2022
Приобретал для HONDA SUPER CUB 50 CUSTOM.
Артикул детали: 530-1010214, производитель KITACO.
Заказываю звезду не первый раз, качество у KITACO отлично – поэтому выбор делаю в пользу данного производителя. В данном случае заказал звезду 14го размера, что обновить старую звезду.
----------------------------------------------------------Acquired for Honda Super Cub 50 Custom.Article of the details: 530-1010214, manufacturer Kitaco.This is not the first time I order the star, the quality of Kitaco is great - so I make a choice in favor of this manufacturer. In this case, I ordered a star of the 14th size, what to update the old star.Powered by Google Translator
도움이 되었나요?
풀 커스텀 빌드 영감
