유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
- 재고 있음
70,453.95 KRW (7,590 JPY)
Webike 포인트: +76 pt
(705.46 KRW)
배송 정보
-
먼저 상품 양식을 선택하세요.
아래 상품 설명은 Google에서 자동으로 번역되었습니다.
상품 상세
■Inner weight specification
[Size] Φ30
[Quantity] Right / Left 1 set
**M6 and M8 are the dimensions of the mounting screws and attached bolts on the handlebar side.If the length of the attached bolt does not match the length of the bolt, please prepare it separately.
*For YZF-R25 / HONDA, stock weights need to be removed.
*Bolts not included for Φ12 (mounting holes).If the stock cannot be used, please prepare the bolt separately.(Example on the use of M10 P1.5 - equivalent to 35 to 45mm)
*Manufactures and models with matching screw diameters only are listed for reference.Please make sure to check the vehicle in person.
*Other colors and types may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
.
* 이미지는 참고용입니다. 표시된 이미지는 실제 제품과 다를 수 있습니다.
These handlebar ends are suitable for big bikes from super sports machines to naked bikes.
The design is a little thicker and the tip is tapered to prevent it from getting caught.
In addition, fine knurling is engraved on the circumference to prevent slippage and to give the product an expression.
The material is either a lightweight aluminum alloy or a heavy stainless steel alloy for vibration control, and two lengths are available: short and long.(Only Φ30)
A long inner weight type is also available for bikes with higher vibration.
A slightly smaller diameter of Φ22mm is also available.
Choose the one that suits you best.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
고객 리뷰
이미지 포함 리뷰
![[Webike Monitor] It purchases to <br>1 clue with the lever guard of the same Manufacturer as the measure against numbness of the <br>hand.
When increasing <br>weight, it was thinking-kana which can reduce vibration <br>, but it was unexpectedly heavy when](https://img.webike-cdn.net/st/photo/article/17/1370604184617M.jpg)
Mar 17, 2017
GSX-R750 L2 (2012 year) I bought it with expectation for the vibration suppression effect of Handlebar.
Although it was described in notes of each car conformity list, processing of Inner Weight (Cutting) Was necessary.
Removed the OEMBar End at the time of replacement and held it by hand to install this product OEMBar End had unexpected weight and it was a feeling that the weight did not change so much.
Originally we expect weight, so Inner Weight (Disconnected) + OEM's Bar End installed.
I felt that the vibration was considerably alleviated after mounting but I did not become 0.
도움이 되었나요?
Jan 28, 2014
I bought this part when it was discounted.
I've been using POSH Ultra Heavy Bar End to cope with the OEM handlebar vibration problem during its high-speed rotation. Since I was no longer able to use that after changing the handlebar to an optional part, I decided to have this part that was inner weight type.
I have the same BABYFACE product for rearsets too, and they are both chic and beautiful.
도움이 되었나요?
Jun 10, 2013
[Webike Monitor] It purchases to
1 clue with the lever guard of the same Manufacturer as the measure against numbness of the
hand.When increasing
weight, it was thinking-kana which can reduce vibration
, but it was unexpectedly heavy when removing the NORMAL.Did you become Massey for a while from the exchange forward about
vibration?It is touch as
.
도움이 되었나요?
Nov 26, 2012
those with weight also with an appropriate Bar end of a NORMAL, and having exchanged --
-- although it became light, the Floppy of that which the Balance of a Weight says, and the Handle under
(only NORMAL : tip elegance concerned : Weight cylindrically extended in Handle)
run decreased frankly.
> appearance also becomes a Stylish and is satisfactory by the effect beyond expectation!!
도움이 되었나요?
풀 커스텀 빌드 영감
