15T is enough for stable cruising.
I chose the 15T, the 5 foot is overdriven, 4 foot is good for quick driving and 5 foot is good for non-torque driving.
상세 보기 유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
- 재고 있음
9,198.93 KRW (991 JPY)
Webike 포인트: +10 pt
(92.82 KRW)
배송 정보
-
먼저 상품 양식을 선택하세요.
장착 정보
KAWASAKI
적합 모델 정보 테이블 열기
-
KLX125
Compatible Information]LX125C-A00055-
-
D Tracker 125
Compatible Information]LX125D-A00078-
아래 상품 설명은 Google에서 자동으로 번역되었습니다.
상품 상세
-
스프로킷 사용 Front
-
적용 가능한 체인 크기 428
-
스프로킷 재질 steel
-
앞 스프로킷 톱니 수 14
428 Size
**Rear sprocket T number ÷ Front sprocket T number = Reduction ratioThe higher the value of this reduction ratio, the more emphasis is placed on acceleration, and the lower the value, the more emphasis is placed on maximum speed.
*Please refer to the compatibility chart for the stock number of knives..
Please visit the manufacturer's website for more information about the product.
Click here for Kitako general information page.
Buy Chain Brush here.
This is a front side (engine side) sprocket made of S45C (high carbon rope), which is light weight and highly durable.
●The sprocket is a consumable item.Please check the sprocket every 1000km as a general guide.(If the tip of the tooth has become thin, please replace it.The life of the sprocket and chain can be greatly improved by daily lubrication.)
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
모델 페이지 링크
고객 리뷰
이미지 포함 리뷰
![It is in play [ of D-TRACKER125 ]. <br>Since it was in the situation where it carries out and a stress builds very much in a trunk road that it is under [ first step / for reason ] if it was the present, but about 60 km/h came to have come out, it became M](https://img.webike-cdn.net/st/photo/article/66/1324710626066M.jpg)
호환성:KAWASAKI D Tracker 125 Compatible Information]LX125D-A00078-, KAWASAKI KLX125 Compatible Information]LX125C-A00055-
Feb 10, 2021
도움이 되었나요?
호환성:KAWASAKI D Tracker 125 Compatible Information]LX125D-A00078-, KAWASAKI KLX125 Compatible Information]LX125C-A00055-
Aug 31, 2020
The Sprocket was also worn out when I replaced the Chain, so I decided to replace it.
Finding an OEM was a pain in the ass so I bought this one to replace it anyway.
So far it looks fine.
도움이 되었나요?
호환성:KAWASAKI D Tracker 125 Compatible Information]LX125D-A00078-, KAWASAKI KLX125 Compatible Information]LX125C-A00055-
Oct 31, 2019
I used it on the D-Tracker125, the OEM is Final is 14/44 and Smallish It gives good acceleration, but the revs go up quickly, so I had to make it a little longer I set the Front to 15T After riding about 7% long for about a month, the increase in RPMs to speed has eased as expected but the lack of Torque made the acceleration small-ishness disappear The finish of the product was good and there was no problem, so if I can get it at this price, next time I'll make a 45 Rear I'm going to try things like reducing the resistance a bit
상세 보기도움이 되었나요?
호환성:KAWASAKI D Tracker 125 Compatible Information]LX125D-A00078-, KAWASAKI KLX125 Compatible Information]LX125C-A00055-
Jun 5, 2019
I ordered based on NORMAL Basic Data, but since it was a used car, Chain It was converted from 428 to 420 As a result, it couldn't be replaced and became a treasure trove of goods
상세 보기도움이 되었나요?
호환성:KAWASAKI D Tracker 125 Compatible Information]LX125D-A00078-, KAWASAKI KLX125 Compatible Information]LX125C-A00055-
Dec 5, 2017
【What made you decide the purchase?】 I purchased it because it was the cheapest among OEM and Other Company Product
【How was it actually used?】 It is not bad because it can be used without trouble
【Was it difficult to install? (Hard parts case)】 It was not particularly difficult
【Please tell me the point of installation and hang (in the case of Hard parts)】 Only 2010 year fixed with Nut and Lock washer
If there is no Impact wrench in the 2010 formula, if you do not turn the Rear wheel by stepping on the Rear brake before removing the Rear wheel, you can remove Nut in Socket wrench
Since the 2011 formula, Snap Ring is required so Snap Ring Fliers is required
Snap Ring Fliers recommends things from tools Manufacturer such as FUJI arrows that can be used properly instead of cheap 3 WAY
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) No parts for parts
[Is there anything I was disappointed about?] There was something like Gold belonging to the U shape of Sprocket that was crushed
Although it was thinly crushed and it seemed to be problematic in terms of use and returned goods also took time and labor, I thought that I wanted to inspect properly though I used it as it was
【Hope for Manufacturer - Please let me know if there are any improvement points; I'd like you to do a proper inspection and lineup 13T
【Have you compared items?】 I compared it with OEM and SUNSTAR with XAM
[Others] After using 15,000 km
I thought that it was pretty worn by saying that it was Drive sprocket, but it was hardly worn as shown in the image
Since OEMSprocket used last time was worn at similar mileage, it can be said that this product is quite a bargain because it can be bought at about half the price of OEM and kept longer than OEM
도움이 되었나요?
풀 커스텀 빌드 영감
