I have a friend who needed a new clutch lever for his MT07 which was damaged during an accident. They asked me if they should go for the OEM or go for an after market one. No question really, I advised a genuine Yamaha one was the way forward.Having got this information, I was asked to order them one so it could be fitted quickly. Webike have a lot of help tools available so you can find the correct part pretty easily. Correct part number found and added to my basket.I generally have more itme in my basket ready to order and this was another that was added. I do like to order more than one part at a time as this cuts down the shipping if I was to order items individually. The courier I chose was EMS fast service. They do what they say and get your order to you very fast. No really sure if I have ever had an order delivered by this service that has been any longer than 5 days. This arrived at my door in 5 days as expected. This makes me happy and also my customers and friends happy too.The order was all packed really well as always from Webike warehouse staff. The outer box was sealed with tape so nothing could be lost whiclst in transit. The inner of the box was all neatly packed and filled with additional bubble wrap. Everything was nice and snug but not too tight to damage anything. ALl the parts and even some of the small parts arrived with me in 100% perfect condition.The lever is a lovely colur black, but not glossy balck, more like a satin. The finishing is perfect, no sharp parts and all the the groove where the cable sits in is also very well machined out. The clutch fitment tab is noce and smoothly finished. Even the bolt hole is very well machined. What's not to love. All fitted in super quick time and this meant my friend could get back out on his bike in just a week from the accident.Very happy with purchase. Thank you Webike for the great services you provide as always.상세 보기

[How is it used?
This is the same part (lever lock) used in the Yamaha AG200 and is a gem that can be held in place while holding the clutch lever. It is very convenient because it is not necessary to put GEAR in Neutral every time when the signal is stopped.

Was the one you received as per Image?
Although it is plated, it looks like it will rust after a while of use, so I think it is better to use the Rubber cover (part number:36X-26372-00), which is also OEM.

Was the installation difficult?
This part can be bolted on to the D Tracker with the ClutchLever pivot bolt, which is a bit of a pain if you also install the rubber cover at the same time. I use ZETA Pivot Lever CP/Clutch 4-fingers for Public Road Folding TypeClutch lever on my D Tracker, and the SpringCase protrudes on the underside of the lever, so the Rubber I sprayed silicon spray on the inside of the cover to make it more slippery, and then managed to push it in. If Lever is OEM, I don't think I would have had such a hard time.

How was your experience with it?
Cost performance is the best! For a little more than 1,000, the left hand is freed from fatigue. You can operate it with one hand, but I think it is better to operate it with both hands (hold the clutch lever with the left hand and lock it with the right hand) to ensure reliable operation. If the lock is not applied properly, the clutch will unlock on its own and the clutch will connect, causing the engine to stall. To release the lock, slightly squeeze the clutch lever, and the spring built into the lever lock will spring up and release the lock automatically.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Items to buy together:OEMRubber cover (part number:36X-26372-00)상세 보기

Thank you for your prompt response.상세 보기

Used for Jog DX.
I had been troubled for some time with a symptom where the Stop-lamp would come on just by putting my hand on the Lever, but I found that the Switch contact on the Brake lever was worn out and that was the cause of the problem, so I replaced it.상세 보기

Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go. This bike is one of my own builds and has Brembo Radial Monoblock calipers which does brake heavy and thought I would try the dual sintered ones first. Finding the correct part was pretty easy as I visited SBS website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own SBS branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are dual carbon, have a high heat resistance. I have not fitted them yet but that will be in the next few weeks. So far though, they look pretty good. Lets hope they perform as they should.상세 보기

I was replacing the steering head bearings on the CB1000R 2015 and this nut got a little damaged and was not the greatest to replace. The new nut was a good purchase and was really good value from Webike. I found the part using the tools Webike provide on their help pages. I had a few other parts in my order so all were shipped together with EMS and arrived in 5 days. All of my items arrived in perfect condition mainly due to being wrapped really well by Webike warehouse. The nut cam in it's own Honda packet and looks superb. The finish is a nice satin silver. The threads are crisp and clean and no excess shards were notinced during inspection. The machining on the outer parts is super clean, very precise and buffed off so there are no noticeable lines etc. It was fitted easily and torqued to the correct setting. This really does finish off the bike as you can see it all the time. Not something I would like to look at when riding if it was damaged. Thank you Webike, great job.상세 보기

This is a bike, NINJA ZX-6R 2007 was a track bike but needed converting back to a street legal bike. With this it needed a bracket for the locking mechanism. The part was not too difficult to find using the help pages and search function on Webike website. The part was not expensive either so I added to my basket, I also needed the bracket for the single seat assay and this was also added to my basket. With some other small parts, I have had this order shipped using EMS and all arrived safely in 5 days. Each part was individually wrapped to keep them safe and sound. This bracket is also finished in a nice satin black paint and there are no uneven spray pattern or drips, runs etc. Really nice and clean. Fitted really easily and one less job to do now. Thanls Webike, great work.상세 보기

This is a bike that was a track bike but needed converting back to a street legal bike. With this it needed a bracket for the single seat assay. The part was not too difficult to find using the help pages and search function on Webike website. The part was not expensive either so I added to my basket, I also needed the bracket for the locking mechanism and this was also added to my basket. With some other small parts, I have had this order shipped using EMS and all arrived safely in 5 days. Each part was individually wrapped to keep them safe and sound. There is not much I can say about this bracket but it is a great quality part. The paint is a standard black satin but it is not a part you would be able to see when riding or parked up anyway. None the less, Kawasaki did a great job with it. The part is sturdy and secure and all the relevant holes all align with the frame. Easy fit and now that is one piece I do not need to worry about. Very happy with the purchase and I thank Webike for their continued hard work.상세 보기

The piston on one side of this bike was ceasing and therefore it needed a new set up. I found the correct parts for the Yamaha FZ1N 2006 by using the tools Webike provide in their help section and cross referencing via Yamaha Parts Schematics. Not really a hard find at all. These do fit a lot of different models so are available. The price that Webike had these listed for was really good value. With some other parts in my basket, I placed my order and everything was shipped using EMS and arrived in 5 days. The packages were all well padded out and no damaged was found. The piston assembly was in it's own box and the pistons look superb. This kit also comes with the set of orings and seals to finish the job. I was really pleased with the quality of the kit and these will make the bike stop as it should once again. Not too difficult to fit and well worth the effort involved. Thanks Webike.상세 보기