플랫 콘티 타입 1 Φ7/8인치 핸들바 스틸

호환성:HONDA Ape 100 Ape 100 -12 (Drum brake model) | Requires switch housing hole drilling only for APE100 (09-), HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) | Requires switch housing hole drilling only for APE100 (09-), HONDA Ape 50 Ape 50 08-12 (FI drum brake model) | Requires switch housing hole drilling, HONDA CB1300 Super Four CB1300 Super Four 03-09 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Japan User(translated)

훌륭함

Sep 16, 2018

There is no problem on the product itself, it is good

Purchase by lowering the Handlebar position of mt - 07.
Because I attached Yamaha Fly Screen, I was concerned about the interference of each Cable, but I think that it is within about no problem although there are some interference.
For mt - 07, drilling is required. I decided the position of the Handlebar, set the positions of the switches, marked with Magic and removed the Handlebar once.
Punch on where you marked.
With Drill 2. 5 mm pilot hole, about 5 mm and about 5. I made a hole of 5 mm, but it was easier than I expected.
I lowered the Handlebar to escape of Cable classes, Limit where Handlebar Lock is possible. It's a full lock and your thumb is caught (Lol)

상세 보기

도움이 되었나요?00

호환성:HONDA Ape 100 Ape 100 -12 (Drum brake model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) | Requires switch housing hole drilling, HONDA CB1300 Super Four CB1300 Super Four 03-09 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Japan User(translated)

훌륭함

Apr 22, 2017

GPZ900RNINJA to the classic Custom

I installed it for NINJA's Pipe Handlebar.
I did not like regulations that are too easy with Up, so I decided to do it here.. Because it is moderate diaphragm and height, Position can do both well from town riding to Winding. Even if you are on a long distance you do not get tired, a height of 166 cm It is a dish of satisfaction for a bad old man.
As expected it is satisfying from price, quality, shape, such as HURRICANE. I can expect strength as it is ChromeSteel.

상세 보기

도움이 되었나요?00

호환성:HONDA Ape 100 Ape 100 -12 (Drum brake model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) | Requires switch housing hole drilling, HONDA CB1300 Super Four CB1300 Super Four 03-09 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Japan User(translated)

훌륭함

Apr 5, 2016

SRX 400 Handlebar replacement

I replaced it from Separate Handle.
I incorporated it with HURRICANE Under bracket and Handlebar Holder.
It was somewhat necessary to adjust the positioning of Front fork.
Cable relation also attached without problem.
It seems that long distance Touring will be easier as well.

상세 보기

도움이 되었나요?00

호환성:HONDA Ape 100 Ape 100 -12 (Drum brake model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) | Requires switch housing hole drilling, HONDA CB1300 Super Four CB1300 Super Four 03-09 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Japan User(translated)

훌륭함

Dec 3, 2015

To BobberCustom

I installed it in VIRAGO 250.
I introduced VIRAGO to Custom for Bobber.
It was the correct answer with the lowest 1 type.
Like that, it was coolly decided!
However, since it interferes with Tank when attached normally, Handlebar Post is inverted and installed.
Because the quality of Plating seems to be strong, is it a place like the well-known Manufacturer?.

상세 보기

도움이 되었나요?00

호환성:HONDA Ape 100 Ape 100 -12 (Drum brake model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 -07 / 08 (Carburetor model) | Ape 100 (09-) only requires switch housing hole drilling, HONDA Ape 50 Ape 50 08-12 (FI drum brake model) | Requires switch housing hole drilling, HONDA CB1300 Super Four CB1300 Super Four 03-09 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter), HONDA CB400 Super Four CB400 Super Four -98 Requires switch housing hole drilling | Requires side caps (for Φ18mm inner diameter)

Japan User(translated)

훌륭함

Nov 19, 2015

Flat continental type 1

Since it can be delivered free shipping on over 3,000 yen, I do not have to go to the PartsShop to buy it, so the Gold amount is the same amount so I would like to buy it again. Installation and shape selection etc from Shop etc. It is Recommendation for those who do not need it.

상세 보기

도움이 되었나요?00