유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
37,482.61 ~ KRW (4,038 JPY)
배송 정보
먼저 상품 양식을 선택하세요.
glom
13-14 MSX125
CB400SF
99-16 NC42
CB400SF
99-16 NC39
CB1300 SF
98-02 SC40
Z900RS
Z1000 (water-cooled)
10-21
NINJA250R
18-21
NINJA1000 (Z1000SX)
11-20
MONSTER796
848
MONSTER 821
HYPERMOTARD796
사이즈:M20XP2.5
소재:고강도 알루미늄 합금
세트 내용:오일 필러 캡 X1, O링 X1
**순정 오일 필러 캡에 오일 레벨 게이지가 달린 차량은 오일 레벨 게이지가 없어집니다.
*모니터의 환경 등의 이유에 의한 화상의 색과 실물의 색이 약간 다르게 보일 수 있습니다.
*주의:설치 사진은 이미지에요, 제품의 색상과 다른 경우도 있습니다.
이 상품은 예고 없이 가격 및 사양을 변경할 수 있습니다..
고강도 알루미늄 합금 소재 (A6061-T6처리 완료) 그래서 정밀 가공된 본체에 양은 처리함으로써 고급감·고정 밀도를 실현.
와이어 락용 천공 가공 후.
O링 부속.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
이미지 포함 리뷰
호환성:DUCATI 1199 Panigale 1199 Panigale For front, DUCATI 848 848, DUCATI 848EVO 848EVO, DUCATI 899 Panigale 899 Panigale, DUCATI DIAVEL DIAVEL
Nov 17, 2020
Wrench holes are covered in BALI.
Used in ZX-25R.
The OEM is hard and sometimes hard to open by hand, but it's easy to open and close with Hex.
However, since the inside of the hole into which Wrench is inserted is covered with BALI and replacement is troublesome, I use it as it is.
It's a shame because it was a beautiful finish when I bought it for other for vehicles.
호환성:DUCATI 1199 Panigale 1199 Panigale For front, DUCATI 848 848, DUCATI 848EVO 848EVO, DUCATI 899 Panigale 899 Panigale, DUCATI DIAVEL DIAVEL
Jul 11, 2020
OEM Black Material:Plastic's Oil Filler Cap (with dip stick) is, for all its function, a It's a cheap-looking part. Our groms are related to OVER's Slider to the Oil inlet, due to the fact that it has OVER's Slider on it. There is a problem of very bad Access, but it's manageable. It seems that the processing of the Dip stick will be necessary in relation to do some work inside Engine soon. When I think about it, Dip stick is only used at the time of Oil exchange, and at the time of Others First of all, I don't use it (you don't reduce Oil). So, if there is only Cap, it is Large sturdy. Because we live in the peaceful country, I don't have to worry about Prank, but I can open and close it by hand and It's safer to say that the Type that tightens with Wrench is safer than the one that does.
So, for our Grom, who's trying to switch to as many gold pieces as he can put on, good I began to look for Filler cap if there is no Filler cap. I thought that this Cap of SPEEDRA was the most parenthesis good among them (it (is subjective). For some reason, the fitment list says it's for 13-16 and JC61, but if it's just Cap, JC75 is also It should be the same Size. I was a little worried, but I ordered it.
The results are as you can see, no problems, and the O-ring is properly attached. The price is very kind, but it is very expensive for only this one thing. But the body is very beautiful and the shine of gold alumite is also very good. The Center has an 8mm Hexagonal Wrench in it, so you can tighten it up with that. (Just don't tighten it too hard, it's aluminum). The slanted shape makes it absolutely impossible to open by hand. Prank is not possible as long as the shape of the
I've posted the last part of the current Engine's Shiningly look, but there's already something I can change. It's about to be gone. The ugly Cell Motor is a bit obvious.
리뷰 상세
