This K-PIT clutch lever look awesome, same as OEM one made by KITACO.Product price is so cheap than the Genuine OEM but the Quality is the same .I'm going to install this new clutch lever on my 1987 TW200.Slide back the rubber clutch cover first then I have to remove the clutch cable from the older clucth lever.Adjust the clutch cable for maximum free play.loosen the knurled lock nut and turn the adjuster in as far as it will go while aligning the slot in the adjuster and lock nut with the slot in the clutch lever perch.pull in the clutch lever with one hand while pulling on the clutch cable with the other.quickly release the lever and pull the cable out of the adjuster and remove it from the lever..Now I used crescent wrench to hold of the bolt on the top then use the 10mm ratchet to loosen the nut on the bottom & removed the bolt and the nut from the clutch lever. removed the older clutch lever , place a new K-PIT CLUCTH LEVER and tighten the bolt and the nut .insert the end of the clutch cable into the new K-PIT LEVER and guide through the slot in the perch,lock nut and adjuster .pull the clutch cable in and pop the cable housing into the adjuster as the lever released.Adjust the clutch cable free play to specification..took 10 to 15 minutes to get the job done. The package arrived on time and very neatly packed.Thanks for the high quality packaging.I have been purchasing parts for a long time from the WEBIKE SHOP AND NEVER HAD A PROBLEM .WEBIKE PROVIDED A GOOD SERVICE AND SMOOTH TRANSACTION.NO WORRIES .I'm a Happy Customer.WEBIKE Shop way beyond 5star. Thank You So Much!!
상세 보기 유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
