유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
- 바이크 용품
- 전자기기 관련 제품
- 멀티 바 마운팅 바
- DAYTONA
- DAYTONA - 멀티 바 마운팅 바
- 제품 목록
- 멀티 마운팅 바 FE
이 사진은 고객이 제공한 것으로, 유사하지만 다른 상품일 수 있습니다.
- 재고 있음
・이 옵션은 사용할 수 없습니다.
・다른 옵션을 선택해주세요.
32,423.67 KRW (3,493 JPY)
배송 정보
재고 있음, 배송까지 24 시간.
예상 도착일
장착 정보
-
NMAX
16-21 (2DS2/BV35,A,E,G)
-
NMAX
21 BAL2/SEG6J
-
NMAX155
-
NMAX155
17-21 (BV43)
상품 상세
[소재]
파이프부, 스테이:스틸 검정 페인트
밀러 어댑터:스틸 검정 페인트
[치수]
취부 유효 길이:200mm
파이프 지름:22mm
접지부:순수 밀러 장착 구멍 (M10)
차종 전용 스테이션&밀러 어댑터 부속
적재 기준 중량:1.0kg
**마스터 실린더, 리어 브레이크 홀더 등을 사외품의 것으로 교환하고 있는 경우, 설치할 수 없습니다.
*전도 등에서 핸들 바의 구부러진 데, 마스터 실린더의 차이가 생긴 경우, 설치하지 못할 수 있습니다..
[Material]
Pipe section, bracket: Steel black paint
Mirror adapter: Steel black paint
[Size]
Effective mounting length: 200mm
Pipe diameter: 22mm
Mounting part: Stock mirror mounting hole (M10)
Bracket & Mirror Adapter included.
Approximate loading weight: 1.0kg
**If the master cylinder or rear brake holder has been replaced with an aftermarket one, it cannot be installed.
*If the handlebar is bent or the master cylinder is out of alignment due to a fall, it won't be installable.
*There may be changes in product specifications due to the manufacturer's reasons.
.
볼트 온에서 쉽게 설치할 수 있는 스테이 부속의 멀티 마운트 바 시리즈에 심플한 모델.
Φ 22.2파이프에 다양한 아이템을 마운트 수 있는 기본 기능은 여전히, 존재를 주장하지 않는 블랙 보디&스테이를 채용했습니다.
배송 정보
고객 리뷰
호환성:YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43)
호환성:YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43)
아주 좋음
Mar 11, 2021
I bought it because it seems to be able to be installed in VMAX when I measure the size though it is NMAX. there is a little obstacle because there is no product of this type for VMAX, but it is easy to see when I use a smartphone as Navigation. The difficulty may be that it is difficult to see the indicators on the Tank depending on the lighting position.
상세 보기호환성:YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43)
아주 좋음
Oct 27, 2020
I'm glad I was able to install it because it's not for the VMAX.
I tried it because it seems to be able to be installed when I measured between the mirror mounts though the VMAX is the car which has not been confirmed to be fit for installation because it is NMAX and NMAX 155.
The result is a decent installation and very easy to see when using my phone as a Navigation, but the Blinker and Gasoline Indicators, RPMs, and water temperature meters are difficult to see.
If you use Vertical type Smartphone Holder or adjust the angle, you can see to some extent.
I don't think this is an Exclusive Design product in this area.
호환성:YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43)
호환성:YAMAHA NMAX 16-21 (2DS2/BV35,A,E,G), YAMAHA NMAX 21 BAL2/SEG6J, YAMAHA NMAX155 , YAMAHA NMAX155 17-21 (BV43)
아주 좋음
Mar 24, 2020
More convenient than the Convenience Holder
NMAX has Pocket, but it's tough to use your phone as Navigation It is
In order to make a place to mount the Smartphone Holder, this I bought the Mount bar from DAYTONA
Because the installation is the same as Mirror, it can easily be done if you have a 12mm wrench Because I have also attached the Hand guard of Y's Gear, it is necessary to make the Mount bar and the Hand guard of Y's Gear to be attached at the same time I was able to install it with no problem
NMAX can be used to attach a Convenient Hook or Helmet holder to the Main I often use the Bolt under the key, but that location is difficult to use, to say the least
This Mount bar and the Convenient Hook and Universal Helmet It is better to use it with the holder It's better not to use it while driving because of the weight on the handlebar
I've been using the Mount bar on my Daytona DL1000 V-STROM650, but It is a good product that is safe to use It is a bit heavy, though

