Impressively Plug and Play Part
Installation was fairly easy. The sensor cable that runs down the forks really wants to stay in a circle shape. Ended up cable tying the sensor line to the brake line to help it straighten out. Was able to use one of the various magnetic bolts that were provided to put a magnet in the rotor. From there I was able to use the double sided tape that comes on the sensor to adhere it to a spot on the fork that would run close to the rotor and detect the sensor. Don't really trust the adhesive so I used some more cable ties to help make sure the sensor stays in place.Take your time figuring out where you want to put the sensor. Mock it up with masking tape or cable ties, then get that front wheel spinning so you know if it's picking up your magnet or not. I took a sharpie and outlined where the sensor was going to go right on my fork once I had found a suitable spot.Truly a plug and play component. Very nice.
상세 보기
