스틱 온도 센서

Bought a complete set temperature meter previously but after sometime the sensor probe went faulty. Perhaps I over tighten it but anyway, it's working fine now. I bought 2 pcs due to the expensive shipping fees.

About quality and texture: I am happy with the quality of the temperature sensor stick from SP Takegawa. Made using a short electrical wire attached to the temperature bulb and using a small electrical connector that allows easy positioning when routing the wire.About the feeling of use: The temperature sensor 3mm diameter bulb fits perfectly into the SP Takegawa oil drain bolt and passes the signal for display on the compact LCD therometer but care must be taken during install so to not crush the bulb and during removal so to not pull the wire from the bulb.Products to buy together: A SP Takegawa oil drain bolt with the mounting hole for the temperature sensor stick would also be desirable to purchase along side the temperature sensor stick for a secure mounting.Difficulty of installation: The process to install takes about 5 minutes, use the included allen key from the oil drain bolt purchase to back off the grub and position the bulb into the bolt then lightly tighten the grub screw to avoid crushing the bulb. Connect the electrical plug and zip tie the wire in a suitable position to avoid being damage if just left hanging from the bottom of the engine. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a accurate reading temperature sensor made from quality parts that is plug and play with the SP Takegawa compact LCD thermometer. There are cheaper sensors available from Koso but am unsure if they would work with the SP Takegawa compact LCD thermometer.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Keep in mind these compact LCD thermometers are only designed to read between 0 to 120 degress celsius so will not be suitable for all locations around the engine.

About quality and texture - Top quality. Perfectly manufactured sensor assembly with heat shrink at the temperature bulb end and electrical connector end to minimise temperature errors due to water ingestion.About the feeling of use - The reading from the temperature sensor to the display is flawless. On inital engine start up the display reads ambient temperature delivered from the sensor and as the motorcycle is riden the temperature display adjusts from the sensor reading at the oil drain bolt.Products to buy together - You will be needing at least a product to display the temperature reading the sensor will read and Takegawa have a few different options available here on Webike depending on your budget. Then if you would like the temperture reading at the oil sump, Takegawa offer an oil drain bolt to retain the sensor securely.Difficulty of installation - The sensor is very easy to install. A simple electical connection and then secure the sensor where you would like it to read the temperature.Cost performance and comparison with other products - I find the pricing good for such a handly product that makes my riding experience more enjoyable. I did not compare other brands temperature sensors as I required the one with the correct electrical connection for my Takegawa meter.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Takegawa offer their temperature sensors in 3 styles, stick, M5 and B1. So select what best suits your setup.

Since I was running the engine harder now I wanted to be able to monitor the oil temperature while riding. Having the Special Parts Takegawa temperature stick sensor connected to my drain plug has made this possible. The part is working as designed but you do have to be very delicate when installing and removing from the drain plug is it can easily be damaged which I have seen another member do. Harness extension is required to have the temperature stick sensor located at your drain plug as the wiring on the sensor itself is very short. Another great part from Special Parts Takegawa brought to you by Webike.

I bought this because I wanted to take the temperature from the Drain bolt.
It's functioning properly!