펜더 제거 키트

If you have your own Level tools (hexagon, extension, driver) and vinyls, you can install it. The work time is enough for 1 hour.
If you put the vinyls on the License Plate LightWiring, it will be safe even in the rainy days.If you pay attention to the center of the Number installation, it looks Refreshing and there is no noise.

The rear area is refreshing and it is recommended for the first custom. The clearance of the screw between the tail lamp and the license light is very narrow, so you need to be careful when you wash your car. I put a protective film on the tail lens to prevent scratches.

个人审美，觉得Z900RS这个车还是没有后挡泥板显得更精神些，于是就选了这个套件。安装简单，做工颜值不错，这是优点。不完美的地方有两个：首先是这个套件顶板上的穿线孔稍微有点大，如果不加处理过积水路面时会溅的车座下全是泥水，最后我用布基胶带结决的问题。然后就是螺丝孔位不能满足中国规格的车牌，如果螺丝孔能向两边拓展一点就好了。----------------------------------------------Personal aesthetics, I think the Z900RS car or no rear fender looks more spiritual, so I chose this kit. Easy to install, good workmanship, which is the advantage. There are two imperfections: first of all, the top plate of this kit is slightly larger than the threaded holes, if not treated with water on the road will be splashed under the seat is full of mud and water, and finally I used cloth-based tape to solve the problem. Then is the screw holes can not meet the Chinese specifications of the license plate, if the screw holes can be expanded a little to both sides would be good.

我的车型：Kawasaki z900rs cafe。改装品材质：铝合金阳极黑色。改装效果：很好看，比原厂尾巴简约时尚。用途：就是为了好看。购买体验：发货时间很快，很快到货，很满意！自己一就可以安装，无损安装，但是安装牌照的位置需要自己加工一下----------------------------------------------My motorcycle is Kawasaki z900rs cafe.The material of the product is black aluminum alloy. The appearance after modification has become beautiful. I feel that it is more stylish and simple than the original one. I bought it because the original one is very ugly...so I have to replace the original one.Its installation does not need to damage the car, and it can be installed by itself. But everyone should pay attention to this problem. When installing, the license plates of each country may need to be processed...Powered by Google Translator

I think it's a very satisfying product for the price considering the Gold face value
If you ask for Diller, it will cost you 20,000+ including labor, so I thought about the Wallet situation and
If you really want to make a Fender Eliminator, I can recommend it
The Instruction Manual is also well enclosed, and even as a maintenance novice myself, I was able to complete the 2-hour I managed to install it in just under a year
However, the photo of the Instruction Manual is hard to see because it is WhiteBlack So some of the mounting screws may be lost
Also, as mentioned in other people's imprints, the Cable of License Plate Light is
Be careful not to install RedBlack in reverse
The part of the Instruction Manual that I don't understand is that there are videos of our predecessors on YouTube Since it's up
It can be installed as a reference
I'm happy to have my ass cleaned up and my ass cleared out of the OEM Fender, but
One thing that concerns me
I can't do anything about it on the product, but the back of the Fender is the same as the back of the Parts installation
There are several gaps in the car body, which may allow water droplets to enter the interior of the car body when it rains or when washing the car
I'm using Vinyl Tape to seal the gaps, but that's all I need to get rid of