Good quality handlebars.The orig.bar ends/vibration dampeners dont fit anymore.this should have been mentioned in theDescription !
상세 보기 유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
이 사진은 고객이 제공한 것으로, 유사하지만 다른 상품일 수 있습니다.
・이 옵션은 사용할 수 없습니다.
・다른 옵션을 선택해주세요.
133,166.31 KRW (14,346 JPY)
배송 정보
이 상품은 단종되었습니다.
[칼라] 블랙
[소재] 알루미늄
[치수]
핸들폭:736.5mm (순정 756mm)
센터폭:120mm (순정 동등)
·당기는 치수 : 36.4mm (순정 104.3mm)
전체 높이:39.4mm (순정 73.3mm)
·조리개:28.4도 (순정 25도)
핸들내경:Φ14.5
[사양]
스위치 박스 설치 홀 가공 완료
위치 결정용 펀치 마크 포함
ACTIVE 바엔드, 이너웨이트 병용 가능 (순정 바엔드 부착 불가)
**순정 바엔드는 장착할 수 없습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다..
[Color] Black
[Material] Aluminum
[Size]
・Handlebar width: 736.5mm (stock 756mm)
・Center width: 120mm (stock equivalent)
・Pull: 36.4mm (stock 104.3mm)
・Total height: 39.4mm (stock 73.3mm)
・Aperture angle: 28.4 degrees (stock 25 degrees)
・Handlebar inner diameter: Φ14.5
[Specification]
・Switch box mounting holes is pre-machined
・With punch mark for positioning
・This product can be used with ACTIVE bar ends and inner weights (cannot be used with stock bar ends)
**Stock bar ends cannot be installed.
*There may be changes in product specifications due to the manufacturer's reasons..
* 이미지는 참고용입니다. 표시된 이미지는 실제 제품과 다를 수 있습니다.
저렴한 비용으로 손쉽게 카타나다운 낮은 전진 자세를 바 핸들로 실현했습니다.
노멀 외장에 대한 간섭도 없으며, 순정 와이어와 호스류도 그대로 볼트 온 장착이 가능합니다.
그립에 걸어서 현수각을 붙이면 스포츠 주행에 적합한 포지션으로 이끌어 줍니다.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
호환성:SUZUKI KATANA 19-21

장착 기종: SUZUKI KATANA
보통
Jun 1, 2023
Good quality handlebars.The orig.bar ends/vibration dampeners dont fit anymore.this should have been mentioned in theDescription !
상세 보기호환성:SUZUKI KATANA 19-21

장착 기종: SUZUKI KATANA
호환성:SUZUKI KATANA 19-21
훌륭함
Jul 3, 2022
I wasn't sure what to do with the STD Handlebar because it was getting up too much and also felt a little far away. So I decided to try this Handlebar and bought it.
Installation is quite easy! Simply remove them in the correct order.
However, when using a Phillips screwdriver to secure switches after installing the handlebar, a shorter screwdriver is required than when removing the handlebar (because the position of the handlebar is lowered and space between the handlebar and the tank cannot be taken).
Now, the Position is surprisingly not tight, and the forward lean is not too tight.
To make it to your liking, the position can be changed more than you think by moving it up or down just a little from the positioning mark.
I didn't dislike the OEM's position, but the change made the overall style of the image from the side view reflective.
By the way, I am 176 cm tall and weigh 67 kg, and I set the Rear suspension to the weakest, and I also adjust the Front fork Initial to slightly weaker.
호환성:SUZUKI KATANA 19-21
호환성:SUZUKI KATANA 19-21
아주 좋음
Aug 4, 2021
Personally, I like the look and the improved Position.
But the vibration has increased.
I use the company's Bar End and Inner Weight together, but it's a little hard because my hands are numb.
It feels better than NORMAL, and I want to use this Handlebar, so I want to think about vibration countermeasures.
이 사진은 고객이 제공한 것으로, 유사하지만 다른 상품일 수 있습니다.
장바구니에 담기 전에 옵션을 선택해주세요.
상품을 장바구니에 추가하는 중 오류가 발생했습니다. 몇 분 후에 다시 시도해 주세요.
리뷰 이미지 갤러리
리뷰 상세