유럽 지역에서 접속하신 것 같습니다.
다음에서 쇼핑하시겠습니까? webike.eu.com?
15,223.25 ~ KRW (1,640 JPY)
Webike 포인트: +16~ pt
(148.51 KRW)
배송 정보
-
먼저 상품 양식을 선택하세요.
장착 정보
HONDA
적합 모델 정보 테이블 열기
-
glom
JC61/JC75
-
MONKEY125
JB02
-
SUPER CUB 50
AA04/AA09
-
SUPER CUB110
JA44 *for 420 size conversion
모두 보기
HONDA
아래 상품 설명은 Google에서 자동으로 번역되었습니다.
상품 상세
-
스프로킷 사용 Rear
-
적용 가능한 체인 크기 420
-
리어 스프로킷 톱니 수 34
리어용
사이즈:420
크로 모리액 장력 강판
이리 수:1개
*
*노멀 스프로킷 (드라이브/15T·피동/34T) 의 짝수 이외에 교환하자, 스피드 미터의 표시에 오차가 발생하므로, 레이스 등에서 사용하시기를 권장합니다.
그리고 도심 주행하는 경우에는 별도로, 속도 펄스 변환 장치가 필요합니다.
*사진은 34개입니다.
*그롬에 장착할 경우 정상의 짝수 이외에 바꾸면, 스피드 미터 표시에 오차가 발생하므로, 레이스 등에서 사용하시기를 권장합니다..
아이템 추가로 폭넓게 세팅이 가능하게.
자그마한 세팅을 가능하도록, 풍부한 치수과 저렴한 가격 설정에서 튜너를 지원. 리어 측 (바퀴 측) 의 스프 로켓입니다.
· 높은 내구성을 자랑하는, 쿠로 모리액 장력 강판을 사용.
스포르킷은 소모품입니다. 일반 주행시 기준으로 약 1000km주행마다 스프로킷의 점검합니다. (이끝이 가늘어지고 있는 경우는 교환하세요. 일상의 주유에 의한 스프라켓 및 체인의 수명은 현격히 향상합니다.)
*리어 스프로킷 T수÷프론트 스프로킷 T수=감속비 이 감속률 수치가 클수록 가속 중시형, 적은 정도로 최고 속도 중시형입니다.
주의사항
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
고객 리뷰
이미지 포함 리뷰
- 전체
- Japan (22)
- Australia (5)
- Belgium (2)
- South Korea (2)
- United States (2)
- Brunei (1)
- Canada (1)
- Malaysia (1)
- Vietnam (1)
호환성:HONDA CROSSCUB110 JA10, HONDA CROSSCUB110 JA45 *for 420 size conversion, HONDA DAX125 JB04/JB06, HONDA glom JC61/JC75, HONDA MONKEY125 JB02
May 12, 2023
도움이 되었나요?
호환성:HONDA CROSSCUB110 JA10, HONDA CROSSCUB110 JA45 *for 420 size conversion, HONDA DAX125 JB04/JB06, HONDA glom JC61/JC75, HONDA MONKEY125 JB02
장착 기종: HONDA Monkey 125
Mar 22, 2023
Monkey jb03 version needs to be machined because the genuine wheel sprocket bolt is 10mm.The Kitako sprocket is 8 mm bolt size, so it needs to be machined to widen the hole with a drill
상세 보기도움이 되었나요?
호환성:HONDA CROSSCUB110 JA10, HONDA CROSSCUB110 JA45 *for 420 size conversion, HONDA DAX125 JB04/JB06, HONDA glom JC61/JC75, HONDA MONKEY125 JB02
장착 기종: HONDA MSX125 (GROM)
Feb 12, 2023
Better Suited Black Finished 420 Rear Sprocket for the Grom
About quality and texture: I am happy with the quality of the rear sprocket from Kitaco. The 34 tooth 420 pitch rear sprocket is manufactured from chrome moly high tensile steel and finished with black paint.About the feeling of use: The main reason I removed the OEM Honda rear sprocket was to rid myself of the silver finish for the better suited black finished rear sprocket from Kitaco to blend in with the black hub and black rim.Products to buy together: Some black axle spacing collars from Kitaco would also be desirable to purchase alongside the rear sprocket for even more black on black.Difficulty of installation: The process to install takes about 30 minutes. Lift and support the rear of the Grom however you can and remove the rear wheel from the swingarm. Loosen the four nuts that secure the OEM Honda rear sprocket and install the Kitaco rear sprocket followed by torquing down the four nuts once again. Refit the wheel to the swingarm and check the chain slack before tightening the rear axle. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a rear sprocket made from a durable material and in a black finish that suits the Grom for a great price as compared to the next cheapest black rear sprocket from SP Takegawa which is almost double the price.About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: If you wish to swap rear sprockets for a change in colour or tooth size then inspect your current drive sprocket and drive chain to see if they will be suitable to use with your new rear sprocket and if not then purchase all three parts together.
상세 보기도움이 되었나요?
호환성:HONDA CROSSCUB110 JA10, HONDA CROSSCUB110 JA45 *for 420 size conversion, HONDA DAX125 JB04/JB06, HONDA glom JC61/JC75, HONDA MONKEY125 JB02
호환성:HONDA CROSSCUB110 JA10, HONDA CROSSCUB110 JA45 *for 420 size conversion, HONDA DAX125 JB04/JB06, HONDA glom JC61/JC75, HONDA MONKEY125 JB02
장착 기종: HONDA Monkey 125
Jul 16, 2022
Rear Driven Sprocket from Kitaco
* About quality and texture, Black painted finished steel rear driven sprocket in 420 pitch same as the Honda OEM part but much lighter in weight without the chain guide and with the large cutouts.* About the feeling of use, Good fit to the rear hub with no oversizing of any holes required and the look of the black sprocket and black rear hub now being 1 piece is a nice touch.* Products to buy together, If you are looking to replace any worn drive line parts you will also be needing to purchase both the drive and driven sprockets and chain all together.* Difficulty of installation, For just the installation of the rear driven sprocket a rear maintenance stand is needed to removed the rear wheel to be able to access the sprocket and it's 4 mounting nuts. The process was completed in 40 minutes with no difficultly.* Cost performance and comparison with other products, There is no cheaper rear driven sprockets for the Monkey 125 here on Webike and I do not see why you would need to pay anymore as this is a great product.* About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, The 420 pitch is good for stock power or a moderate power increase but if your engine is pushing out double the power you want to go with the 428 pitch. Use the product reviews to assist in making a decision on your purchase.
상세 보기도움이 되었나요?
풀 커스텀 빌드 영감
