배기 조인트 개스킷

신상품 중고 부품

신상품 중고 부품

중고 신규 입고

중고 신규 입고

재고에서 즉시 배송 가능한 상품

0 (87)

0 (70)

0 (40)

0 (69)

0 (21)

0 (27)

0 (97)

0 (33)

이 상품을 구매한 고객이 함께 구매한 상품

0 (12)

0 (19)

0 (9)

0 (3)

0 (66)

0 (99)

0 (64)

0 (90)

최근 본 상품

0 (56)

0 (26)

0 (27)

0 (34)

0 (83)

0 (10)

0 (27)

0 (95)

고객 리뷰

3.8 /5

(20 리뷰)

5 개

25%

4 개

35%

3 개

35%

2 개

1 별

리뷰 작성

이미지 포함 리뷰

I think it's an exhaust leak

배기 조인트 개스킷

호환성:KAWASAKI D-Tracker D-Tracker 1993-1999, KAWASAKI KLX250 KLX250 1993-1999, KAWASAKI KLX250ES KLX250ES 1993-1999, KAWASAKI KLX250SR KLX250SR 1993-1999

Japan User(translated)

보통

Apr 6, 2019

I installed it in the OEM joint of KLX250SR
The outer diameter was Exactly, but the inner diameter was too big and there was no space between the clamps no matter how much you tighten the clamps It felt like it was going to be empty, so I dealt with it by applying liquid Gas to it stiffly
It's a good thing that the tip of the pipe is plugged in, so it's a large and sturdy pipe without liquid gas It may be, but again, if you want to use it for this motorcycle, you need to use the Recommendation I can't

도움이 되었나요?

배기 파이프 조인트 개스킷

호환성:HONDA XR250 XR250 1995-2007, HONDA XR250 Baja XR250 Baja 1995-2007, HONDA XR250 Motard XR250 Motard 1995-2007, HONDA XR400 Motard XR400 Motard 2005-2008

Japanese Webike user

훌륭함

Jan 20, 2022

DRCJoint gasket

I bought this product because my XR250MOTARD was leaking gas from the joint gasket and it was bothering my neighbors. the KITACO product was cheaper, but I wanted to stop the leaking completely and it was highly rated, so I bought this one.

As an advise, you can apply grease to both the inside and outside of the joint gasket with a cheap oil-based product. This will make installation easier, increase efficiency, protect the gasket, and also seal the gasket against gas leaks as the grease will burn off with heat after installation.

The most common mistake is to modify or cut the gasket because it is difficult to fit. It depends on the material.

If you have a Slip-on Silencer, you can use a pliers tool to widen the Silencer side so that the joint gasket can fit. If it is a Slip-on Silencer, you can use Pliers etc. on the Silencer side to widen the joint gasket to fit.

Most of the time, the gasket doesn't fit well on the external silencer side, so the gasket is damaged by forcing it to fit.

The Gas leak stopped completely and I was very happy with Large.

도움이 되었나요?

배기 조인트 개스킷

호환성:HONDA CRF250 RALLY CRF250 RALLY 2017-2020 LD model also compatible, HONDA CRF250L CRF250L 2017-2020 LD model also compatible, HONDA CRF250M CRF250M 2017-2018

Bonified

훌륭함

Apr 2, 2021

DRC EXHAUST JOINT GASKET

Thank you, WEBIKE! I didn't think I would ever find the right part. This exhaust joint gasket fits the Delta Barrel 4 Exhaust. I didn't have a caliper to measure the exact fit of the exhaust joint and they smash after use. So I didn't know the actual size I needed. It was proving quite difficult. My exhaust wouldn't fit without it. I now have it am I'm very pleased with the product. Thanks again, WEBIKE.

도움이 되었나요?

배기 조인트 가스켓

호환성:KAWASAKI D-Tracker 125 D-Tracker 125 2010-2016, KAWASAKI KLX125 KLX125 2010-2016, KAWASAKI KLX150 KLX150 2009-2013 S

Japanese Webike user

아주 좋음

Nov 13, 2020

The last one.

I bought it again because it was new and somehow it got into the back of the MiddlePipe.
I've bought JMCA Certified for places where I can't run without changing the exhaust system many times, but the quality is usually fine.

도움이 되었나요?

배기 조인트 가스켓

호환성:KAWASAKI D-Tracker 125 D-Tracker 125 2010-2016, KAWASAKI KLX125 KLX125 2010-2016, KAWASAKI KLX150 KLX150 2009-2013 S

Japan User(translated)

훌륭함

Jan 20, 2018

Is good

I bought it for when I removed and adjusted the Exhaust System in spring and adjusted it afterwards.
The product will be purchased for the third time.
There are BALI on the cut surface, but it is acceptable range.
I always find it useful.

도움이 되었나요?

풀 커스텀 빌드 영감